214 – An Unacceptably Low Cylinder Compression

Airplane Owner Maintenance - By Dean Showalter

Dean Showalter에서 제공하는 콘텐츠입니다. 에피소드, 그래픽, 팟캐스트 설명을 포함한 모든 팟캐스트 콘텐츠는 Dean Showalter 또는 해당 팟캐스트 플랫폼 파트너가 직접 업로드하고 제공합니다. 누군가가 귀하의 허락 없이 귀하의 저작물을 사용하고 있다고 생각되는 경우 여기에 설명된 절차를 따르실 수 있습니다 https://ko.player.fm/legal.

2y ago 31:51

MP3•에피소드 홈

This is a good looking exhaust valve with a nice concentric appearance. However, the compression was very low at 8/80.

I lapped the valve, hoping it would improve the compression test result… it only came up to 10/80, and that was after running the engine again and getting it nice and hot.

Although the valve face showed a healthy appearance, the seating area was telling a different story. Check out the following borescope photo of the seating area showing a possible leaking area:

It appeared there was abnormal wear on the valve seat, and the valve was not able to seal well, causing an unacceptably low compression result.

Listen to the audio for more details on this one.

I asked the question, “Borescope or compression tester… which one is better?”

Let me know what you think after listening. I’m curious to hear your thoughts.

Just click the button over to the right and record a brief audio message for me.

Thanks!

We ended up sending cylinder #5 out for repair, and then reinstalling it.

We did a test flight today, and everything went very well… ready to go for another year!

Here are some links to information on cylinder / engine break-in procedures:

Lycoming SI1427C

Proper Engine Break-In

Engine Break-In: It’s Easier Than You Think

Savvy Aviation / EAA webinar slides by Mike Busch (Cylinder Break-In.)

Let me know if you find other excellent resources on this topic.

The post “214 – An Unacceptably Low Cylinder Compression” appeared first at AirplaneOwnerMaintenance.com

159 에피소드

#Business #Airplane #Maintenance #Pilot #Dean Showalter #Podcasting Education #Owners #Prevention #Performance